Read the forum code of contact
By: 30th January 2010 at 16:40 Permalink - Edited 1st January 1970 at 01:00
-Hi Paul
The sticktop for a GR3 came from redundant F2 Tornados IIRC. Haven't you got a GR1 sticktop........?
John
By: 31st January 2010 at 03:53 Permalink - Edited 1st January 1970 at 01:00
-Hi John
Yes I have a GR1 stick top but unfortunately have a GR3 column and the two just won't go together. I am just about to have a very costly machined part made up so I can join them but even then it is going to look ugly so would prefer a GR3 top to my ugly joiner - if that makes sense.
Cheers
Paul
By: 31st January 2010 at 16:50 Permalink - Edited 1st January 1970 at 01:00
-Hi Paul
Are you sure that Evereatts haven't got a GR1 control column? As we've discussed before, the GR1b (precursor to GR3) was intro'd under a Service Engineered Mod, so I'd be surprised if the Control Column couldn't be reverse engineered.
Is there anyone out there who used to be at St Athan and would have c/o the SEM who could elaborate?
John
By: 1st February 2010 at 02:56 Permalink - Edited 1st January 1970 at 01:00
-Hi John
I have asked Everetts more than once without any luck. It would be very easy to reverse engineer, just have to unscrew the GR3 bit (4 screws) and add on the GR1 part, probably take less than 10 min. The only (main) problem is the GR1 part that joins the grip to the column is actually 2 cast items that are matched together and have a large thread on the top which is beyond my capabilities of manufacturing. See part numbers 12 and 13 of the attached diagram.
Cheers Paul
By: 1st February 2010 at 07:52 Permalink - Edited 1st January 1970 at 01:00
-Alles klar!
Best of luck mate, I'll keep an eye out for one for you
John
By: 2nd February 2010 at 21:31 Permalink - Edited 1st January 1970 at 01:00
-Paul - can you post a photo or two of what you do have. I may have an idea.....
By: 3rd February 2010 at 10:48 Permalink - Edited 1st January 1970 at 01:00
-Hi JagRigger
Any help or ideas are greatly appreciated, here is what I have, it appears to me that the only difference between a GR1 and GR3 column is the very top part that the grip actually attaches to.
Cheers Paul
By: 3rd February 2010 at 10:52 Permalink - Edited 1st January 1970 at 01:00
-can you post a photo of what you want a grip to fit to? I have seen a Tornado GR1/F2 grip in the stores of a scrapyard...though it is expensive!!
Are you telepathic Paul!?
By: 3rd February 2010 at 23:01 Permalink - Edited 1st January 1970 at 01:00
-If I was telepathic I would have known about the one in the scrapyard already. I may contact you about further details but at this stage it appears I may have found something suitable.
Regards
Paul
By: 4th February 2010 at 00:06 Permalink - Edited 1st January 1970 at 01:00
-Hi JagRiggerAny help or ideas are greatly appreciated, here is what I have, it appears to me that the only difference between a GR1 and GR3 column is the very top part that the grip actually attaches to.
Cheers Paul
That grip looks SO much like a Mirage grip!
Posts: 832
By: ozjag - 30th January 2010 at 11:37
Hi all,
I am posting this request as a last resort in the hope someone can help me. I am seeking a Tornado grip (F1 I think) to add to my Jaguar GR3 control column, I have tried all other avenues and am about to embark on a rather costly course of having something made that will allow my GR1 grip to fit my GR3 column.
Otherwise the top part of a GR1 column with the screw thread would be even better.
Thanks in advance
Paul