Read the forum code of contact
By: 31st January 2015 at 05:28 Permalink - Edited 1st January 1970 at 01:00
-BFP
This help?[ATTACH=CONFIG]234974[/ATTACH]
By: 31st January 2015 at 18:24 Permalink - Edited 1st January 1970 at 01:00
-Yes it's a very helpful start. I'm also looking for the dimensions to locate each of the instrument bolt holes, BFM holes and the radius of each of the four corners.
Thank you
By: 1st February 2015 at 12:01 Permalink - Edited 1st January 1970 at 01:00
-Of course it may depend upon exactly which instruments you intend to fit, but here are some drawings which may help:
By: 1st February 2015 at 16:26 Permalink - Edited 1st January 1970 at 01:00
-I've got a lot of dimensions from the Kollsman book for instruments. What I'm struggling with is the centres of the holes relative to each other plus the holes for the panel mountings and tube attachment.
Trust me to be building the one BFP that doesn't use the standard 6 of the Spit :(
By: 1st February 2015 at 16:41 Permalink - Edited 1st January 1970 at 01:00
-That's absolutely stellar Terry. Those drawings are a huge help! Thank you so much :)
Posts: 140
By: Jag248rpa - 31st January 2015 at 00:50
Does anyone have a dimensional drawing for RAF blind flying panel? I'm look for the rectangular type.
Thanks