Read the forum code of contact
By: 19th July 2006 at 13:11 Permalink - Edited 1st January 1970 at 01:00
-Picture's a bit small.
By: 19th July 2006 at 13:40 Permalink - Edited 1st January 1970 at 01:00
-Doesn't an attached picture usually enlarge when you click on it? It seems to not do it in this thread.
By: 19th July 2006 at 15:09 Permalink - Edited 1st January 1970 at 01:00
-Yes, it usually does but now... :confused:
By: 19th July 2006 at 15:49 Permalink - Edited 1st January 1970 at 01:00
-Picture's a bit small.
Yeah, sorry, but the file size is 400kb, max to upload is 300kb, so I had to reduce it, but didn't know how to make it any bigger than it is... :o
If you strain your eyes for a few seconds, you should be able to make it out.
By: 19th July 2006 at 17:59 Permalink - Edited 1st January 1970 at 01:00
-I've had that happen to me once or twice before as well. You need to download the add-on that somebody recently - AIsmooth. It will stop this from happening as well as "go-arounds" by placing either your aircraft or AI traffic into a holding pattern.
Posts: 2,343
By: cloud_9 - 19th July 2006 at 12:57
I have just had the most craziest thing happen to me...
Was doing a flight from LAX to SFO, everything was going fine as I was on course, had the runway in sight and speed was good. I had just contacted SFO Tower and accpeted landing clearence, it stated "Number 1" for landing on 28R, and then just before I reached the runway, I noticed a large shadow behind me, and as the image shows, an MD-80 flew directly over the top of me, and came into land on 28R! Just as I touched down, the tower instructed me to do a 'go-around', but because there was such a small distance between the two aircraft, I ended up ramming the MD-80 up the behind, literally!
Bet I won't be able to re-create it again, but by jove it was an interesting experience! :D