how do you get the tornados wings swept back

Read the forum code of contact

Member for

17 years 9 months

Posts: 52

hi all

i bought Flight Simulator 2004 a centruy of flight about 2 weeks ago and i downloaded the tornado gr4 i was just wondering how you get the wings to sweep back and forth?

many thanks

Nathan

P.S does anyone know any good downloading websites for FS2004
except flightsim.com

Original post

Member for

18 years 10 months

Posts: 221

The Tornado I have (I think it's the DSB one, but can't remember at of the top of my head), you work the "Swing Wing" by the flaps control.

As you lower the flaps to Full, the wings open, Raise the flaps to Close the wings.

Member for

19 years

Posts: 2

www.avsim.com has a very comprehensive download library. You have to register but it is free.

The Tornado I have (freeware, not sure where it came from) has the wings linked to airspeed so they sweep back automatically.

Member for

18 years 8 months

Posts: 4,721

I have the F3 DSB one but is wondering how do I get the afterburner's on?

James

Member for

17 years 7 months

Posts: 3

If you have the dsb Tornado F3 v3.2 then I use this setup in my aircraft.cfg file

[LIGHTS]

light.0=3, 19.204, 0, -3.5, fx_dsb_tornado_strobe
light.1=3, -2.595, 0, 2.9, fx_dsb_tornado_strobe
light.2=3, 4.654, -5.3, 0.55, fx_navred
light.3=3, 4.654, 5.3, 0.55, fx_navgre
light.4=3, -29.056, 0.4, 10.9, fx_dsb_tornado_navwhi
light.5=3, -29.056, -0.4, 10.9, fx_dsb_tornado_navwhi
light.6=5, -22.796, -1.55, -0.5, fx_dsb_tornado_burner_flame
light.7=5, -22.796, 1.55, -0.5, fx_dsb_tornado_burner_flame
light.8=5, -22.596, -1.90, 3, fx_dsb_tornado_burner
light.9=5, -22.596, 1.90, 3, fx_dsb_tornado_burner
light.10=5, -22.596, -1.90, 3, fx_dsb_tornado_burner
light.11=5, -22.596, 1.90, 3, fx_dsb_tornado_burner
light.12=3, 13, 0.0, 2.0, fx_tornado_vclight_green
light.13=3, 8, 0.0, 2.0, fx_tornado_vclight_green
light.14=2, 2, -5.3, -3, dsb_landinglight
light.15=2, 2, 5.3, -3, dsb_landinglight
light.16=2, 2, -5.3, -3, dsb_landinglight
light.17=5, 2, 5.3, -3, dsb_landinglight
\\light.18=9, 17.5, 1.9, -2.5, dsb_cannon

[smokesystem]
smoke.0= -1.5, -15, -22, fx_dsb_tornado_contrail25
smoke.1= -1.5, -15, 22, fx_dsb_tornado_contrail25

Pressing L turns all lights on, the Landing light is activated with O and the burners with CTRL+L(both these can be assigned joystick buttons for ease)

hope this helps
Matt

Member for

18 years 8 months

Posts: 4,721

Ok cheers I go and try it.

James