Read the forum code of contact
By: 3rd April 2012 at 16:20 Permalink - Edited 1st January 1970 at 01:00
-You could probably read the lettering off a model decal sheet
if it is to add to paints for FS, bear in mind it is not going to be clearly readable at 1 point or so.
By: 3rd April 2012 at 18:56 Permalink - Edited 1st January 1970 at 01:00
-Just put whatever you want there. It'll not be legible at the resolution you'll be working with. Here are examples of what I used to label my paints with:
Door handle instructions Vers1: "This text is too small to be read. So I will type whatever I want"
Door handle instructions Vers2: "If it ain't flush it ain't fit to push"
Pitot tubes I labeled: "Hot hot hot and pointy"
Static ports: "Do not cover, paint or use as shaving mirror"
Posts: 1
By: growley803 - 3rd April 2012 at 13:09 - Edited 2nd October 2019 at 11:40
I am looking for details of the lettering shown on the body of this aircraft. In all the photos I've seen, I cannot find any closeups where I can actually read the lettering. I know it's there but just can't read it. Here is an example from the tail:
[ATTACH]204417[/ATTACH]
Here is a door:
[ATTACH]204418[/ATTACH]
There is lettering all over the body of the 777. Where can I find information (doesn't have to be photos) on this?
Thanks, Garrett