By: sopwith.7f1
- 14th October 2013 at 16:11Permalink- Edited 1st January 1970 at 01:00
Hawker instrument panel.
Can anyone help identify this instrument panel ?.
I believe it to be off of a Hawker biplane. It has the cut out for the bomb release lever on the top left hand side. Looks similar to Hart/Hector, but it is not an exact match for any that I have seen.
By: powerandpassion
- 15th October 2013 at 07:05Permalink- Edited 1st January 1970 at 01:00
Trainer panel
Can anyone help identify this instrument panel ?.
I believe it to be off of a Hawker biplane. It has the cut out for the bomb release lever on the top left hand side. Looks similar to Hart/Hector, but it is not an exact match for any that I have seen.
Cheer's.
Bob T.
Trainer panel, back cockpit ? Does look very Hartish, but carve out for CC gear pump on RHS missing.
Does have all the instrument cut outs consistent with something like a back panel.
Would love to get a paper template to compare against front panel and make some deductions.
By: sopwith.7f1
- 19th October 2013 at 14:55Permalink- Edited 1st January 1970 at 01:00
Lucky find.
I recently bought this home made barometer, I was fairly sure that it had been converted from an early altimeter.
Upon taking it apart, I not only discovered that I was right, but that it was the exact type "MK V" I was looking for, for one of my projects.
It is missing the backing plate, adjuster knob, & a few screws, but it shouldn't be too hard to make it look complete.
By: sopwith.7f1
- 1st November 2013 at 14:30Permalink- Edited 1st January 1970 at 01:00
Some hurricane bit's I have available for exchange "roughly 140 - 150 parts", there are also a couple of other bits which are not in the photo's "wing skin & rib bits".
By: sopwith.7f1
- 21st November 2013 at 15:04Permalink- Edited 1st January 1970 at 01:00
In answer to several enquiries I have had about the Hurricane parts, & other items I have available-
Whilst I would ideally prefer to swap them for items I need for my projects, I may be willing to sell them as no one seems to have the items I am looking for "or if they do, then they do not wish to swap/part with them".
By: DanS333
- 29th December 2013 at 22:10Permalink- Edited 1st January 1970 at 01:00
Hi People,
We are chasing some servicable Brake bags(or any for that matter!) for a Devon
Devonair have none availble.
If you can help please drop us an Email
[email]dh.104preservation@gmail.com[/email]
Regards, D.P.G
By: RWSSCARB
- 30th December 2013 at 13:51Permalink- Edited 1st January 1970 at 01:00
Hi everyone I'm after a Harrier mk9a seat harness and G strap. I have loads of Harrier parts if someone wants to do a swap for something. It's about the only part I need to complete the seat that is in my cockpit. Thanks in advance
By: sopwith.7f1
- 20th January 2014 at 14:29Permalink- Edited 1st January 1970 at 01:00
Finally got around to looking through some of the drawings for the WW2 type that I hope to build a panel etc for, & most of the drawings that I will need appear to be there.
I also found some useful info on a few of the gauges etc that I will need, should anyone have any of them kicking around, they are-
AUTO PILOT CONTROL C0CK MK IV 6H/301.
AUTO PILOT STEERING LEVER MK IV 6H/603.
AUTO PILOT SPEED LEVER MK IV 6H/602.
AUTO PILOT ATTITUDE CONTROL MK IV 6H/356.
SMITHS FUEL CONTENTS GAUGE MK II # 96-FG 6A/796.
SMITHS FUEL CONTENTS GAUGE MK II # 98-FG 6A/797.
ID SWITCHBOX 5C/372.
4 WAY C0CK B2670 "MADE BY AIRCRAFT FITTINGS Ltd".
Posts: 1,101
By: sopwith.7f1 - 14th October 2013 at 16:11 Permalink - Edited 1st January 1970 at 01:00
Hawker instrument panel.
Can anyone help identify this instrument panel ?.
I believe it to be off of a Hawker biplane. It has the cut out for the bomb release lever on the top left hand side. Looks similar to Hart/Hector, but it is not an exact match for any that I have seen.
Cheer's.
Bob T.
Posts: 1,354
By: powerandpassion - 15th October 2013 at 07:05 Permalink - Edited 1st January 1970 at 01:00
Trainer panel
Trainer panel, back cockpit ? Does look very Hartish, but carve out for CC gear pump on RHS missing.
Does have all the instrument cut outs consistent with something like a back panel.
Would love to get a paper template to compare against front panel and make some deductions.
Posts: 1,101
By: sopwith.7f1 - 15th October 2013 at 14:58 Permalink - Edited 1st January 1970 at 01:00
Hi Ed
I'm making no promisses, but I will see if there is somewhere local where I can get it scanned.
Bob T.
Posts: 526
By: Versuch - 16th October 2013 at 22:51 Permalink - Edited 1st January 1970 at 01:00
Nice item Bob...and difficult to exact match, Im going for Audax.
Hopefully Ed may turn something up.
Cheers Mike
Posts: 1,101
By: sopwith.7f1 - 19th October 2013 at 14:55 Permalink - Edited 1st January 1970 at 01:00
Lucky find.
I recently bought this home made barometer, I was fairly sure that it had been converted from an early altimeter.
Upon taking it apart, I not only discovered that I was right, but that it was the exact type "MK V" I was looking for, for one of my projects.
It is missing the backing plate, adjuster knob, & a few screws, but it shouldn't be too hard to make it look complete.
Bob T.
Posts: 1,101
By: sopwith.7f1 - 1st November 2013 at 14:30 Permalink - Edited 1st January 1970 at 01:00
Some hurricane bit's I have available for exchange "roughly 140 - 150 parts", there are also a couple of other bits which are not in the photo's "wing skin & rib bits".
Bob T.
Posts: 1,101
By: sopwith.7f1 - 4th November 2013 at 13:39 Permalink - Edited 1st January 1970 at 01:00
I have a new email address, should anyone be interested in any of the items I have, &/or have items I am looking for please email me at-
[email]mjc.snipe@gmail.com[/email]
Bob T>
Posts: 1,101
By: sopwith.7f1 - 21st November 2013 at 15:04 Permalink - Edited 1st January 1970 at 01:00
In answer to several enquiries I have had about the Hurricane parts, & other items I have available-
Whilst I would ideally prefer to swap them for items I need for my projects, I may be willing to sell them as no one seems to have the items I am looking for "or if they do, then they do not wish to swap/part with them".
Bob T.
07501117763
[email]mjc.snipe@gmail.com[/email]
Posts: 155
By: DanS333 - 29th December 2013 at 22:10 Permalink - Edited 1st January 1970 at 01:00
Hi People,
We are chasing some servicable Brake bags(or any for that matter!) for a Devon
Devonair have none availble.
If you can help please drop us an Email
[email]dh.104preservation@gmail.com[/email]
Regards, D.P.G
Posts: 188
By: RWSSCARB - 30th December 2013 at 13:51 Permalink - Edited 1st January 1970 at 01:00
Hi everyone I'm after a Harrier mk9a seat harness and G strap. I have loads of Harrier parts if someone wants to do a swap for something. It's about the only part I need to complete the seat that is in my cockpit. Thanks in advance
Posts: 89
By: Tropic Thunder - 31st December 2013 at 12:18 Permalink - Edited 1st January 1970 at 01:00
i have those pm me your list of parts on offer and any other bits ur after
Posts: 188
By: RWSSCARB - 31st December 2013 at 13:32 Permalink - Edited 1st January 1970 at 01:00
Pm sent, thanks
Posts: 462
By: Stan Smith - 31st December 2013 at 22:28 Permalink - Edited 1st January 1970 at 01:00
Still looking for a Zenith 36 AKB carb for a series III Bristol Cherub
Posts: 582
By: austernj673 - 2nd January 2014 at 17:17 Permalink - Edited 1st January 1970 at 01:00
Kicking starting 2014 with a projects request. Can anyone please help with a static display Merlin engine propellor shaft please?
Posts: 1,101
By: sopwith.7f1 - 20th January 2014 at 14:29 Permalink - Edited 1st January 1970 at 01:00
Finally got around to looking through some of the drawings for the WW2 type that I hope to build a panel etc for, & most of the drawings that I will need appear to be there.
I also found some useful info on a few of the gauges etc that I will need, should anyone have any of them kicking around, they are-
AUTO PILOT CONTROL C0CK MK IV 6H/301.
AUTO PILOT STEERING LEVER MK IV 6H/603.
AUTO PILOT SPEED LEVER MK IV 6H/602.
AUTO PILOT ATTITUDE CONTROL MK IV 6H/356.
SMITHS FUEL CONTENTS GAUGE MK II # 96-FG 6A/796.
SMITHS FUEL CONTENTS GAUGE MK II # 98-FG 6A/797.
ID SWITCHBOX 5C/372.
4 WAY C0CK B2670 "MADE BY AIRCRAFT FITTINGS Ltd".
Bob T.
[email]mjc.snipe@gmail.com[/email]
Posts: 9,780
By: David Burke - 28th January 2014 at 21:34 Permalink - Edited 1st January 1970 at 01:00
I have an ex ATC Slingsby T.31 suitable for exchange with a museum
Posts: 1,101
By: sopwith.7f1 - 21st March 2014 at 15:17 Permalink - Edited 1st January 1970 at 01:00
Some Typhoon/Tempest cockpit items I have available for exchange, see beguining of thread for details of the kind of stuff I'm looking for.
I also have 3 Typhoon elevators available as well.
Bob T.
Posts: 1,101
By: sopwith.7f1 - 1st April 2014 at 12:28 Permalink - Edited 1st January 1970 at 01:00
Another item to add to the list of parts available for exchange.
A 1940 dated gunsight.
Still looking for early aircraft instruments cockpit fittings etc.
Bob T.
Posts: 1,404
By: hindenburg - 4th April 2014 at 18:36 Permalink - Edited 1st January 1970 at 01:00
Still looking for...
4x j switch plug
Londex relay
TR 1196 with leads. For radio operator section
Tuning dial for Gee indicator
1124 Beam approach receiver
Chart board. For Nav section
F24 camera 4 foot flex drive
Camera drive motor mount
Recuperator for turret
Throttle/ choke unit. For bomb aimers station
MK 4 auto-pilot servo unit and large gyro or gyro cover.
Anything Stirling.....have some nice bits to trade.
Posts: 1,404
By: hindenburg - 4th April 2014 at 21:07 Permalink - Edited 1st January 1970 at 01:00
Sorry..didn't notice this was your own wants list sopwith...but do you have any of the above..I have a spare telelevel gauge....